In the shutdown state; at the same time according to the "delta" and "connected" button, enter the menu, digital tube display "F1 F4" on the digital display the corresponding numerical selection, press the power button menu "delta" Golden Eagle, "del" key value setting.
6. Each menu
:Set the temperature 1 - 38 degrees, leaving the factory: 18 degrees centigrade
F1:The temperature difference is 1 - 15 and the factory temperature is 2
F2:Temperature correction -15 - 15 OC: 0 C
F3:Start time delay 0 - 5 minutes: 1 minutes
F4:Over temperature alarm at 20--80 centigrade: 40 OC
Attention: setting temperature is limited by over temperature setting, lower than the temperature set 2 degrees, the same temperature set the minimum, set the temperature limit, higher than the set temperature of 2 degrees
The power supply of this product can be used alone, and must be connected with the leakage switch.
The overclocking temperature control range: 18 - 35 degrees centigrade
To ensure the safety of new products, more attention should be paid to the changes in the past few days. The temperature sensing probe of this product must be higher than the electric heating rod.