Menu

Connect with us

Ningbo leap NZ-1 hand electric dual-use transformer coil count winding machine shake wire machine special price

price:USD$72.00
discount 70% in 2018-07-19 to 2018-07-21
price: USD$ 50.40
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Using hand gear transmission, mechanical digital counting. It can be used for hand winding various small coils and winding all kinds of coil tapes. All the gears of the winding machine are made of hard plastic, which is more fluent than iron.

technical parameter

Maximum diameter of winding coil: 150mm

Maximum width of winding coil: 120mm

Counting range: 0-9999 circles

Transmission ratio: 1:81:1

 

Product instructionsUses:
NZ-1 type electric hand counting winding machine is suitable for electric appliance industry, winding various recorder head, inductance coil, coil instrument, buzzer, relay, timer, power transformer coil and various TV, radio and all kinds of flat coil, the plant design and production of products of reliable, convenient operation flexible, stable, and accurate counting, digital clarity etc..
Mechanical principle:
The 1. hand electric counting winding machine is driven by the driving gear of the swing handle, and the counter is counted through the driving gear without the head gear. The speed ratio between the main shaft and the counter shaft is 10:1. When the spindle is turned 1, the counter shaft is 1/10, that is to say, the number of the counter letters is 1.
2. the machine can be used both hand and electric, and the handle is unloaded when electric. The maximum speed of the spindle of the winding machine is 2000 rpm / min..
3. the main oil hole is normal, a small amount of oil.

Usage method:
1., the machine should be placed on a strong table, the platform panel is wooden, the machine floor has 3 holes, used for the fixed press between the machine and the work platform.
2. when using the left hand plate, the reset handle of the counter is reset to 00000, and the counter is reset to the handle plate two times, so that the counting gear is all in the reset state. (otherwise, the gear slip is not counted) to start the operation, the operation can be restored 0, is strictly prohibited at the time of operation 0.

Specifications
1. the maximum diameter of the winding 150m/m
2. maximum length of winding coil: 100m/m
3. digital counting range 0-99999 circles
Speed ratio of 4. rocking handle to bobbin: fast: 1:8
5. outline size (length X width X height) 290m/mx100m/mx180m/m

Friendly reminder:

Because this product belongs to fragile goods, when you receive the baby, please open the acceptance first, in good condition and sign again. Give me the rest.