Menu

Connect with us

Mechanical keyboard, shaft pulling device, axle removing device, cherry shaft disassembling shaft keyboard maintenance tool CIY general purpose

Parents attention! Before using this tool, the tin must be removed with the iron and the suction gun, and then the shaft can be drawn out. Otherwise, the solder joint or the line will be pulled out if the force is pulled out

price:USD$16.80
discount 70% in 2018-07-15 to 2018-07-17
price: USD$ 11.76
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

National parcel postActivity date: 2017-11-1209:24:00-2017-12-1109:24:00
Single order full 68 elementFree shipping(non postal areas: Xinjiang, Tibet, Hongkong, Macao, Taiwan, overseas)

Shaft pulling device for keyboard maintenance tool

Parents attention! Before using this tool, the tin must be removed with the iron and the suction gun, and then the shaft can be drawn out. Otherwise, the solder joint or the line will be pulled out if the force is pulled out

Explanation:The axle pulling device is shaft pulling,The key pulling device isPull cap. NeedPlease click the link below to pull the key

Axle pulling deviceTutorial.

1. remove the tin by removing the stitches with the iron and the gun

2. clamp the shaft switch on both sides of the keyboard at the front of the keyboard. Press it slightly, and then lift it up, then the shaft switch is taken off (on the premise that the pin of the shaft is clean and pulled out, the solder joint or the line will be pulled off)

The following pictures will update the drawings temporarily, please forgive, do not know can ask xu. Thank you

 

Template protection code
Template protection code