discount 70% in 2018-09-24 to 2018-09-26
price: USD$ 21.84
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
The national post!
Note: the following provinces in shipping, Hainan, Inner Mongolia, Ningxia area, Gansu, Qinghai, Xinjiang, Tibet!
Not in the scope of the provinces before making the shipping please contact the owner to change the price of freight! Otherwise no delivery! Thank You for Your Cooperation！
Just go through courier!
① Factory set:Press the set key on,3Seconds after the release set button to restore the factory settings!
② Control mode:According to a 'set' button Let it showF-1Then, according to a 'set' button to enterF-1The menu, and then press the 'Add' button to display [HH] as the heating control mode, according to "reduction" [keyCC] refrigeration control mode selection after according to a set key can save and exit!
③ Temperature setting:The interface displays the current temperature According to the 'Add' or 'cut' button can control the temperature settings required, after setting according to a 'set' button to save and exit!
④ Return difference set:According to a 'set' button [displayF-1Then press the "add"], "reduction" button or buttons can be adjusted when the display function.F-1time According to the 'Add' button to displayF-2At this time, in a 'set' button to enterF-2Function is the return difference parameter adjustment interface, according to the 'Add' or 'cut' button to adjust back to the difference between the return difference mean temperature and temperature difference of start stop, if you want to control the heating If the set temperature control30Of return difference set2It is more than the current temperature30The degree of relay off, below28The degree of the relay is closed, the return difference is2! Refrigeration control is the opposite state control!
⑤Temperature correction settings:The adjustment function of No.F-3Show according to a 'set' button to enterF-3The parameter adjustment interface, adjustment range-5.0~5.0When the temperature is not accurate, and the temperature can be corrected by this function, if the measured current temperature higher than the actual temperature0.5Can adjust the parameters for the correction of-0.5According to the "keys", you can save!
⑥Start delay time setting:When the stop start after the next start to meet the set time before they can start, general refrigeration control mode to protect the compressor, heating control can be set to0 That is the factory default0The delay time.0-10Minute
Thank you to our store, I wish a happy shopping!