Menu

Connect with us

Temperature control switch temperature controller with KSD9700200 degree normally closed 5A250V high temperature ceramic heat protector

Normally open = over temperature, normally closed = over temperature disconnect,

price:USD$4.20
discount 70% in 2018-09-25 to 2018-09-27
price: USD$ 2.94
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Minimum Order Quantity:3
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Ceramic thermal protector KSD9700200 degree normally closed 5A/250V temperature control switch

Temperature range of KSD97005A/250V temperature control switch. Large amount of excellent.

Normally open = over temperature, normally closed = over temperature disconnect

Technical parameter:

Rated current: DC12V/12ADC24V/10A AC125V/8A  AC250V/5A

Normal electric strength rate: >800V

Normal contact resistance: <50mR (ultra low internal resistance)

Insulation resistance: >100MR

Response speed:≦1℃/min

Life times: more than >10000 times

Operating temperature: 15 ~ 230 C (spot error)5 degrees, customizable±3 degrees)

Reset temperature: 0 ~ 140 C (error)15

Matters needing attention:

1, the use of contact temperature installation, should make the product attached to the surface of the charged device.
2, the installation can not put the plastic or metal casing collapse or deform, so as not to affect the performance of.
3, metal products with insulating sleeve in the installation can not be removed or crushed without external insulation sleeve, to avoid leakage, to ensure safe use.
4, the products are used in the circuit is not greater than the 5A current, should choose the copper core section is connected with the wire 2 mm 0.4-0.75.
5. The products should be stored in the places where the relative humidity is less than 90%, the ambient temperature is below 40 degrees, and the places are ventilated, clean, dry and non corrosive gas.

Product structure:

KSD9700A-120mm*7.6mm*4mm (PBT high temperature resistant plastic case)
KSD9700B20mm*7.4mm*3.8mm (metal shell)
KSD9700C20mm*8.5mm*5mm (ceramic shell) wire: PVC wire or high temperature silica gel wire.