1, widely used in oil exploration, oil refining, chemical, military and other hazardous environments and offshore oil platforms, tankers and other places.
2, suitable for explosive gas environment 1 zone, 2 zone places.
3, suitable for IIA, IIB, IIC explosive gas environment.
4, group T1-T6 temperature group.
5, applicable to the higher degree of protection, wet places.
6, 85 ~ 260V AC and DC 24V two power supply modes selectable.
7, the international famous brand: chip chip, imported per watt, brightness up to 150lm, life up to 100 thousand hours of work for the low voltage DC LED light source, no ballast, DC drive power supply and integrated LED light source for lighting.
9, the shell is made of Aluminum Alloy whole casting, surface corrosion, anti electrostatic spraying.
10, flameproof explosion-proof grade high, with excellent dustproof, waterproof, corrosion resistance.
6, the design of radiator: cylindrical array radiator of conventional LED radiator will greatly avoid the accumulation of dust phenomenon. The internal use of inner circle array heat sink design, so that the temperature of heat transfer surface light source to quickly make LED chip temperature balance, reasonable control, in the range of 40 degrees LED and power supply temperature rise. To ensure maximum lamp life
9, transparent: the diffusion transparent implementation of 360 anti glare hassle by Ling light, crystal glass, toughened high purity, corrosion resistance and impact resistance, light transmission rate of 95%-98%.
Executive standard: GB3836.1, GB3836.2
Explosion proof mark: ExdIICT6Gb
Rated voltage: AC220V50/60Hz (if you have special request, please specify)
Protection grade: IP66
Flux: more than 120lm/W
Protection grade: WF2:WF2
Introduction device: G3/4 "into the mouth of specifications for diameter of 10mm- with 14mm cable
Terminal: <2.5m2 "
reliable connection line
Installation: ceiling type, A: B: C: pipe hanging, ceiling, wall, fence type F: flange type
Source: 70W-150W LED