Connect with us

Automatic module electric door remote control / automatic door multi-function expander / automatic door universal remote control unit

discount 70% in 2018-10-20 to 2018-10-22
price: USD$ 131.60
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Commodity code [521261913660]

Product overall characteristics

Learning method:Press the learn button, the light turns green, into the learning state, then press any key to remote learning, the green light flashes two times to learn success. 3 seconds after the automatic exit to standby state.


Deletion method:Press the learning key for 5 seconds, green light flashes down, you can delete all the coding. (this product does not have a single deletion)


Brief introduction of remote control function:


1. press A key (Quan Suo): internal and external sensor failure, no outer disk failure, lock automatically locked, inside and outside the toilet personnel completely unable to import. (night goods, holidays, anti-theft lock period)


2. according to the B remote control button (single): external probe, sensor failure, and lock automatically locked doors, but no disk and sensors within the effective, only internal staff can enter the credit card. The inside probe is effective and can go out. (work clearance time)


3. press the remote control C key (fully open): the inside and outside probes and the access controller all fail. The automatic door stays open and does not turn back. (handling, temporary ventilation and emergency periods)


4. press D key (BI) and effective induction probe, the lock unlocked. (used for normal business hours)


The overall characteristics of expander


The current electricity output module.


Unique 12V~36V AC / DC power input, convenient directly from the electric sliding door unit.


The exquisite shell design, easy fixation, small volume.


The built-in surge absorber, can effectively prevent backflow when the spark electric lock action.


The four button remote control humanization design, easy for four kinds of working state of automatic door switch.


All the gating signal into a unified induction expander, automatic door lock access control signal and the signal from the expander output contact. And has been used as the internal time difference to ensure the smooth and automatic opening of the lock.


There is audible indication when the remote control is switched on, and the red light will turn green at the same time, so that the switch can be validated.


Technical indexes and parameters


forElectric power supply AC/DC12~36V


The maximum permissible electric current of 3A (12V)


Static power 35mA


Current 85mA (excluding electric current)


The time difference between unlocking and automatic door opening is 0.5 seconds


Built in surge absorber for professional equipment


Microwave self learning code for transmitting and receiving mode


Remote control battery is more than 18000 times the action


The working environment temperature is -42, ~45 centigrade


Working environment humidity 10~90RH


Appearance size: 123mm (L) *50mm (W) *32mm (H)


Total weight 280G


Specific precautions


We pay special attention to the input power desirable automatic door unit AC/DC12~36V, but to ensure sufficient capacity. When the control power of the conventional automatic gate unit can not be directly referenced, the 12V DC stabilized power supply with enough capacity should be connected with it.


Such as the 12V DC power input from 8 to 1, even fight 4 terminal access terminal, can not answer


Wrong。 Please refer to the instructions of the supporting products in detail.


The actual output current of the DC regulated power supply must be greater than the maximum action current of the electric lock (preferably 1.5 times more).


Multi function expander - when the built-in, hidden in the deep, may make the switch indicator light noise.


Inside and outside the sensor power supply not from the function expander access, terminals connected to the main controller of the original automatic door probe power on.


The machine is in accordance with the factory sequence, the warranty period is one year (non-human factors)