discount 70% in 2018-09-23 to 2018-09-25
price: USD$ 58.80
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
This productDivided intoPlastic probe, metal probeTwoThey are all waterproof, and they can measure air temperature:The metal probe is made of stainless steel, for ordinary environment, thermal conductivity of metals is relatively higher than plastic, the sensitivity will be slightly higher than the plastic; if it is long time for a slightly corrosive environment, can choose the plastic waterproof plastic probe, probe the corrosion resistance is better than the metal probe. The accuracy is the same, but the shell material is different,Please buy according to their own actual situation.
Introduction and description of product function
Function 1: temperature control function (default mode)
1. temperature setting: "start temperature" and "stop temperature" are set separately. Press "down" or "to" arrow ", began to set the" start temperature "and" stop when the temperature reaches the set temperature, temperature, the temperature that is your set temperature.
2. High temperature startupSet the "starting temperature" is greater than "stop temperature", the thermostat is in "high temperature start" state. For example, set the "stop temperature" to 20°CThe "starting temperature" is 30°CThen, when the measured temperature reaches 30°COr higher than 30°CWhen the machine is turned on, the indicator light (green light) is on, and the outlet is powered. When the measured temperature drops to 20°CWhen the machine is closed, the standby light (red light) is on, and the socket is out of power. (used for cooling equipment, heating circulating pump, etc.)
3.Low temperature startingSetting the starting temperature is less than the "stop temperature", and the thermostat is in "low temperature start" state. For example, set the "stop temperature" as the "stop temperature"30°CThe "starting temperature" is 20°CThen, when the measured temperature reaches 20°COr less than20°CWhen the machine is turned on, the indicator light (green light) is on, and the outlet is powered. When the measured temperature rises to 30°COr higher than 30°CWhen the machine is closed, the standby light (red light) is on, and the socket is out of power. (mostly used for heating and heating equipment)
Set memory function: temperature controller will store your settings, to ensure that the power outage settings will not be lost, no additional settings.
Function two: time control function
(start time control by setting the middle temperature setting button)
"F1" intermittent time control mode (circulating switch machine)
The middle digital tube displays "F1"". The left side of the F1 corresponds to the stop time: press the up and down key (1~99 minutes) to set. The right side of the F1 corresponds to the opening time: press the up and down key (1~99 minutes). Such as F1 left to set "05", F1 on the right set "10", that is, stop 5 minutes, boot 10 points. When the red indicator is on, the green indicator light is on and so on.
"F2" countdown time control mode (timed shutdown)
The middle digital tube displays "F2"". The setting range is between 0001 and 9999 minutes. Left corresponding time: 1~99 settings. Right corresponding time: 1~99 settings. The left corresponds to the thousand bits per hour of the timing. The right corresponding is the ten bit of the timing time. If the left side of the digital tube is set to "12", the right digital tube is set to "00", then the timing time is 1200 minutes, that is 20 hours. Set the time, socket power off, green lights out, red light. Application of timing shutdown, such as electric vehicle timing charging, etc..
"F3" appointment time control mode (timing boot)
The middle digital tube displays "F3"". The setting range is between 0001 and 9999 minutes. Left corresponding time: 1~99 settings. Right corresponding time: 1~99 settings. The left corresponds to the thousand bits per hour of the timing. The right corresponding is the ten bit of the timing time. If the reservation is set for 20 minutes, 20 minutes later, the green indicator lights, and the socket has electricity. Application scope, scheduled appointment boot.
Function three: temperature correction function
(before the factory has been corrected, in addition to special circumstances, generally do not need to adjust)
Before the power is switched on, the temperature is reduced, and the starting temperature is added (that is, the left and the right two keys), then the power is switched on, and then the temperature correction setting mode is entered. Digital tube display "--P00--", P00 as the default value, not amended. By increasing the correction value at the stop temperature (see P01, P02, P03...). By decreasing the boot temperature to reduce the correction value (see P-1, P-2, P-3...).For example: the thermostat display temperature is 10 degrees, and the actual temperature is 15 degrees, so the P00 can be adjusted to P05, and then cut off the power on again, then the thermostat display is 15 degrees; if the actual temperature is 7 degrees, so the P00 can be adjusted to P-3, and then cut off the power on again, this time display temperature controller 7 degrees.When the temperature correction value is adjusted to an appropriate value, 5 seconds without key operation settings are automatically saved, now need to power again after power can enter the normal working process.