Commodity code 
Nanjing Chuan Chuan automation equipment Co., Ltd. specializes in providing V4 series mechanical pressure switch, adjustable pressure switch, water hydraulic pressure switch.
V4 series mechanical pressure switch, adjustable pressure switch, water hydraulic pressure switch (K4, F4)
Mechanical pressure switch, built in AAAA or piston sense printing AAAA, is used to convert air pressure or hydraulic pressure and other physical quantities into an electric switch signal. Through the six angle wrench adjustment screw in 2mm, the user can easily set the switch point.
Site control or factory setting of pressure control point.
Wide measuring range, high overload capacity of 0.3-400bar
High reliability, high repeatability, silver plated contacts, large electric shock capacity
Micro switch through UL/CSA/CE authentication
Scope of application: Oil / water / gas
Body: 24mm six angle brass or stainless steel
Thread specifications: 1/8BSP, 1/4BSP, 1/8BSPT, M10*10, 1/8NPT, 1/4NPT, 1/4BSPT
Mounting position: any position
Working temperature: - 20 degrees of 90
Maximum travel: 90 / min
Setting device: inner six corners screw
Hysteresis: 15-25% setpoint
Error: 5% set point
Mechanical life: 1 million times
Protection level: IP65
Connection mode: DIN43650 connector
Maximum load: DC30V, 3A
Switch logic: normally open and normally closed
Material: diaphragm NBR NBR
EPDM three ethylene propylene rubber
Piston 316L stainless steel with NBR seal
Hydraulic interface brass or 316L stainless steel
Power connection DIN43650 connector, protection grade IP65
Detailed information can be referred to our company for consultation.
Nanjing Chuan Chuan automation equipment Co., Ltd.
Address: No. 9 Bridge North Road, Pukou District, Jiangsu, Nanjing.
Can provide you with professional industrial automation instrumentation services and technical support: V4 series mechanical pressure switch, adjustable pressure switch, hydraulic pressure switch.