Commodity [Yu9mGexKT5hHJyY=] encoding
Nanjing and Sichuan automation equipment Co. Ltd is a professional V4 series mechanical pressure switch adjustable pressure switch hydraulic pressure switch.
V4 series of mechanical pressure switch, adjustable pressure switch hydraulic pressure switch (K4, F4)
Mechanical pressure switch, built-in g AAAA or piston seal is used to sense AAAA, pneumatic or hydraulic physical quantity into an electrical switch signal. The adjusting screw through the 2mm inner six angle wrench, the user can easily set the switch point.
The pressure control point adjustment or factory set.
The measurement range of 0.3-400bar, high overload capacity
High reliability, high repeatability, silver plated contact, electric capacity
The micro switch through the UL/CSA/CE certification
Scope of application: Oil / water / gas
Body: brass or stainless steel angle 24mm six
Thread specification: 1/8BSP, 1/4BSP, 1/8BSPT, M10*10, 1/8NPT, 1/4NPT, 1/4BSPT
Mounting position: any position
Working temperature: - 20 degrees of 90
Maximum travel: 90 / min
Setting device: six angle screw
Hysteresis: 15-25% setpoint
Error: 5% set point
Mechanical life: 1 million times
Protection level: IP65
Connection: DIN43650 connector
Maximum load: DC30V, 3A
Switch logic: normally open and normally closed
Material: NBR NBR diaphragm
EPDM three ethylene propylene rubber
The piston of 316L stainless steel with NBR seal
Hydraulic interface brass or stainless steel 316L
Connect the DIN43650 power connector, protection grade IP65
Detailed information please call our consulting.
Nanjing and Sichuan automation equipment Co.
Address: Jiangsu province Nanjing city Pukou District Bridge Road No. 9.
Can provide services and technology of industrial automation instruments of professional support for you: V4 series of mechanical pressure switch, adjustable pressure switch hydraulic pressure switch.