discount 70% in 2018-09-23 to 2018-09-25
price: USD$ 105.00
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
Thank you for your attention!
Intelligent temperature controller 380V three-phase power, 220V single-phase electric universal thermostat
HS-650 three-phase temperature protection manual
A basic configuration:
1. external power supply: 220VAC, 220VAC/380VAC output control.
2. control objects: a set of output control, maximum power 10KW resistance.
3. temperature display: three digital tube display, a display temperature detection group (hereinafter referred to thermometry) a set of display settings, open (hereinafter referred to a group of open temperature), display off set value (hereinafter referred to Guan Wen).
4. temperature detection: a temperature detection, temperature range: -9~99 DEG (10K3435 thermistor).
Control parameter adjustment range：3~99°
1:High reliability design, the main control chip adopts imported industrial grade PCU, electrical control circuit design is 1/3 higher than the rated power, the 2 completely eliminate the interference caused by the crash, the control circuit and the output pressure bearing failure;
2:Senior safety circuit design -- electricity, electric circuit respectively 2 circuit board design, strong power, weak completely isolated;
3:The use of a machine - heating / cooling mode can be selected for use, can control the heating * heater, hot water circulating pump; cooling can control the ventilation device or refrigeration equipment etc.;
4:Double temperature control settings: open 2 Temperature / temperature shutdown temperature between the distance can be freely set (such as: open the output is not higher than 28 DEG, less than 33 DEG C or less than 9 DEG C open close output output, close the output of more than 47 DEG C, etc.) to avoid the common thermostat and frequent stop ills;
5:The operation is simple and powerful, the temperature value and the temperature difference after the normal use of memory, as long as the "key" on / off;
6:The temperature control of temperature control, timing, timing advance timing closing opening temperature can set an appointment.
Two, the basic functions and parameters:
1. two kinds of heating / cooling temperature control mode can be used with controlled temperature parameters: (default heating mode)
1) model of heating temperature control parameter setting rules: open temperature < off temperature, the temperature rise of lights, namely: low temperature high temperature closed open.
2) cooling mode control parameter setting rules: a temperature value, closing temperature, cooling the lamp, namely: high temperature low temperature start off.
2. heating and cooling temperature control mode of two kinds of operation mode:
1) model of heating operation mode: detection temperature less than open temperature value on output, the temperature detection temperature is more than or equal to shut off output.
2) cooling mode operation mode: detection of temperature is more than or equal to open temperature value on the output, the temperature detection temperature less than shut off output.
3. factory default control parameter: open temperature: 35 degrees, close the temperature: 38 degrees
4. temperature control parameter adjustment range：3~99°
5. limit setting range:30~99 degrees (default 38 degrees, see advanced set 1).
6. infrared remote control:Straight line remote control distance of 15 meters, with a temperature control button function of host, but no press function.
7. long-term temperature control:Press control parameter of long-term operation.
8. timing control:Standby booking open temperature control, temperature control operation can make an appointment to close temperature control.
9. freeze protection:Standby, detection temperature are less than 3 degrees when the road open output of more than 5 DEG C to close the output, output after the opening 10 minutes not stop heating output, then every 10 minutes to open the output of 1 minutes.
10. detection of temperature calibration:If you encounter incorrect measurement according to the actual temperature calibration adjustment of the system (see advanced 2).
11. factory default recovery:If the user makes improper controllers not functioning can be restored to the factory default parameters (see advanced 3).
12. temperature alarm circuit fault:When a temperature sensing circuit or open circuit when the alarm buzzer, the corresponding E1 screen display circuit, resume normal operation.
13. memory:All the parameters of the final set to save memory, running in the power, the power supply was restored according to the state before the power of operation.