discount 70% in 2018-09-20 to 2018-09-22
price: USD$ 35.70
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
WK-SM series computer intelligent temperature controller adopts advanced single-chip microcomputer controller, which is easy to operate and intelligent. The controller can automatically open and close the power supply of various electric equipment according to the temperature set by the user,Widely used in boilers, heating, superconducting radiator, heater, electrothermal film, electric cable, electric heating, electric heating, electric heating kang floor electric heating insulation and thawing, insulation box, fan, hot and cold fermentation, seed germination control etc.。
One product features
1. easy to install without changing the pipe and line of the application equipmentroad
2.You can set the starting temperature (0-99 DEG C) and the stop temperature (0-99 DEG C) according to your needs, and automatically open and close the power supply of all kinds of electrical equipment。
3. using SOP large package chip, high integration, digital programming, anti-interference ability is strong；The new type of temperature sensor is sensitive and accurate, and the sensor can be connected according to the user's needs without affecting the accuracy;
4. possessHigh temperature startupandLow temperature startingFunction, set the starting temperature and stop temperature at any time (temperature return), namely energyControl heating equipmentAnd againControl refrigerationequipment。
5.SM3/SM3AThere are three groups of digital displays, the middle is the measured temperature, the left is the stop temperature, the right is the starting temperature.
SM1There is only one display, the standby state displays the measured temperature, and when the starting temperature is stopped or the temperature key is stopped, the starting temperature and the stopping temperature are displayed and regulated.
6. haveForced startfunctionWhen the ambient temperature drops below 3 degrees centigrade, the thermostat starts forcibly to prevent freezing equipmentOvertemperature alarmFunction,If the ambient temperature is more than 90 degrees centigrade, the temperature controller digital tube flashes and the buzzer sounds, prompting the user to deal with it in time.
Two operation instructions
1. temperature setting
When the starting temperature is higher than the shutdown temperature, the computer is in high temperature starting (suitable for circulating cooling of boiler and pump, etc.). When the measured temperature reaches the starting temperature, the "running" lamp is bright and works with electrical appliance. When the temperature drops to the shutdown temperature, the power supply is cut off. So cycle work. When the starting temperature is lower than the shutdown temperature, it is automatically at low temperature (suitable for heating and heating). When the temperature is less than the starting temperature, the electric appliance works. Cut off the power supply when the temperature is greater than the shutdown temperature. According to the "heating" arrow, the number increases. Decrease the number of "cooling".
The temperature setting of SM1:When the SM1 is in standby, only the measured temperature is displayed, the temperature setting key is not displayed, and the starting or stopping temperature can be set. After the setting is successful, the temperature is automatically restored to display the measured temperature.
Due to the heating and cooling of the two needs, so our thermostat also has "high temperature start" and "ground temperature start" two modes of operation.
1.Temperature setting"Start temperature" and "stop temperature" are set separately. Press "down" or "up" arrow, start setting "start temperature" and "stop temperature", when set the temperature to meet the demand temperature, the temperature at this time is the temperature you set
2.High temperature startupSet the "starting temperature" is greater than "stop temperature", the thermostat is in "high temperature start" state. For example: set "stop temperature" is 20 degrees C, "start temperature" is 30 degrees C, then when the measured temperature reaches 30 degrees C or higher than 30 degrees C, the machine opens, the operation indicator (green light) is bright, at this time the socket power supply. When the actual temperature is reduced to 20 degrees C, the machine is closed, the standby indicator (red light) is bright, and the socket is powered off. (used for cooling equipment, heating circulating pump, etc.)
3.Low temperature startingSetting the starting temperature is less than the "stop temperature", and the thermostat is in "low temperature start" state. For example: set "stop temperature" is 30 degrees C, "start temperature" is 20 degrees C, then when the measured temperature reaches 20 degrees C or less than 20 degrees C, the machine opens, the operation indicator (green light) is bright, at this time the socket power supply. When the measured temperature rises to 30 degree C or higher than 30 degrees C, the machine is closed, the standby indicator (red light) is bright, and the socket is powered off. (mostly used for heating and heating equipment)
Set memory functionThe temperature controller will store your settings to ensure that the settings will not be lost during the blackout and no additional settings are required.2The connection of temperature controller
Insert the thermostat's power plug into the 220V power supply, the device that is less than or equal to the maximum load is directly inserted into the outlet of the thermostat, and the equipment larger than the maximum load needs to be replaced by contactor.Air conditioning motor and other inductive load starting current is 3-7 times the normal working current, please use the contactor.
3. temperature sensitive head use notes:
As long as you correct operation, the temperature head is not easy to damage, without changing frequently, the temperature head that can plug and pull seems convenient. In fact, the galvanized plug is easy to be oxidized and connected, leading to the failure of the temperature control signal, causing serious consequences, our factory has considered the work has stopped. Computer memory "golden finger", long time will be oxidized connected virtual, is the same principle.
4Selection of temperature sensitive head
(1) the magnetic suction temperature head is suitable for adsorption and fixation on the metal. There is a permanent magnet block inside it, and it is bonded with glue. Therefore, the temperature response time of the waterproof temperature head is a little slower than that of the waterproof temperature head;
(2) water sensitive temperature sensitive head, suitable for use in waterIf you want a faster temperature response, or a humid environment, or a direct measurement of air temperature, please choose a waterproof head when you are under 80 degrees of humidity and humid environment.
(3) the air temperature response is very sensitive, if you measure directlyDry airTemperature, and high sensitivity requirements, please choose air temperature head.
Many customers home commonly used thermometer to test the temperature control is accurate, because most of the families do not have regular thermometer itself measurement correction, even if the two branches of the same type thermometer shows the temperature is not the same, so there is no way as standard measurement instruments to identify whether our accurate temperature controller! You are recommended to do the following experiments: the probe clip in your armpit, the normal temperature of adults is between 36 to 37 degrees Celsius, the control precision of temperature controller we are positive and negative 1 DEG C, so, as long as the thermostat temperature measurement in this range, you can consider our temperature controller temperature is normal the