Menu

Connect with us

Normally closed solenoid valve, boiling water valve DC12V4, pure copper bathroom shower valve 9V24V220V normally open

Factory direct sales, quality assurance, affordable! The joint is 4 extra thread, DN15! Wiring regardless of positive and negative poles. Normally closed solenoid valve is suitable for water pressure range: pressure solenoid valve 0.1-7 kg, non pressure solenoid valve 0-2 kg. Normally open solenoid valve: 0.1-7 kg. All copper valve is one way valve without non-return function

price:USD$62.00
discount 70% in 2018-07-17 to 2018-07-19
price: USD$ 43.40
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

 

 

Voltage

Electric current power
 DC 9V 360 Ma  4W
DC 12V 315 Ma  4.3W
DC 24V 200 Ma  5W
AC 220V Household lighting Household lighting

The above data is for reference only!

 Reminder: installation should pay attention to reverse installation, and the valve body has arrow indication,

Reversing the installation will cause water to flow backward or unable to switch normally

This solenoid valve has no non-return valve function and is not suitable for two-way flow.

 It is indicated that the normally closed solenoid valve is operated by opening the solenoid valve when the power is switched on.

    Normally open solenoid valve is not through the power of the water, after closing the solenoid valve does not work.   

The pressure solenoid valve is suitable for tap water supply

The non pressure solenoid valve is suitable for tap water, low water pressure / water tank / water tower, and can also be used as drain valve.

 Product model

 FL-2T
control mode AC and DC
Use medium  The clean water, the air of the pump
Medium temperature  0~90
Connection mode 4 extra thread
Material of electric impact valve The valve body is made of whole copper
Operating voltage range Rated voltage + 10%
Use water pressure range  The pressure solenoid valve is 0.1-7 kg and the non pressure solenoid valve is 0-2 kg. Normally open solenoid valve: 0.1-7 kg
Filtration function Own filter device
Non-return function nothing
Water pressure resistance characteristics Hydrostatic pressure 1.0MPa, duration 5min, internal structure without deformation, no rupture, no leakage of external structure
Movement characteristics Hydrostatic pressure modelsUpper limitWorking water pressure, plus rated voltage open 5S, turn off 5S, after 100 thousand times no exception
Product introduction  DC9V/DC12V/DC24V/AC220V

All the solenoid valves have been tested before the factory, and some of them will be filled with water. Please feel free to use them!

 Hint: solenoid valve should not be energized for a long time! One hour working time is recommended within 2 hours! (220V solenoid valve is recommended to control in half an hour), the longer the working time, the bad probability will become larger.

220V work with voice, mind don't beat!